Looking to develop a custom IoT solution
but not sure about the right hardware to use?
Answer the following questions, and let our experienced team guide you
through the selection of the most ideal components for your custom solution!
What are the focus industries for your IoT product?
Choose all that is applicable to you.
You can select more than one.
Required field:
What stage is your current development at?
How many employees are available
to help you out with this project?
Which of the core modules listed
below matches the requirements of your IoT project?
All the options mentioned also allow BLE communication.
nRF52840 MCU + SX1262 LoRa Transceiver
Espressif ESP32-WROVER
Does your solution require a communications capabilities extension?
The WisBlock's modular system allows you to extend the connectivity capabilities of your project with just one click.
Required field:
Important Note: The WisBlock Base allows the connection of up to 1 module in its IO slot. Therefore only one WisBlock Wireless or WisBlock Interface module can be connected.
What properties need to be measured for the product to function?
Please select all the sensors required by the solution.
Measure high precision non-contact temperature on bodies, machinery, or similar industrial equipment
Measure precise location coordinates within seconds. GPS, GLONASS, QZSS, and BeiDou Satellite support
Measure Temperature and Relative Humidity in a specific area
Measure absolute pressure in a specific area
Measure light intensity in a visible range
Measure temperature, humidity, barometric pressure, and gas resistance to acquire air quality information in a specific area
Measure product motion & orientation
Measure location coordinates. GPS and GLONASS Satellite support
Detects combustible gasses and smoke
Detects rainfall and fog
Required field:
Important Note: The WisBlock Base allows the connection of up to 4 WisBlock Sensors. In case the solution requires GPS capabilities, the WisBlock Base will only support the connection of up to 3 sensors including GPS
What additional interfaces need to be measured or detected for the product to function?
Please select all the extra inputs/output required by the solution.
Get access to all WisBlock Core signals through four 8 pin headers.
Extend the available IO ports of the WisBlock core with additional 16 bidirectional IO’s.
Connect Click Boards (MikroElektronika), QWICC (Sparkfun) based and Grove (Seeed).
Connect industrial sensors and actuators that support 4-20mA interface.
Connect industrial sensors and actuators that support RS485 interface.
Connect industrial sensors and actuators that support analog signal.
Extend the access of 16 PWM (pulse width modulated) outputs.
Allow to control higher voltage signals and peripherals.
Offers safe communication over up to 40 m distance between the Local Interconnect Network (LIN) bus nodes.
Connect additional sensors, digital I/O, analog I/O, and slave devices through the I2C and UART ports.
Senses sounds level in the environment.
Control one stepper motor or two DC motor.
Required field:
Important Note: The WisBlock Base allows the connection of up to 1 module in its IO slot. Therefore only one WisBlock Interface or WisBlock Wireless module can be connected.
Does your solution require a visual display or an interactive feature for the end-user?
An Electronic Paper display consumes extremely low power, including three buttons to handle interactions.
Include three capacitive touch buttons to handle interactions.
Drive RGB LEDs with up to 20mA per segment via I2C interface.
Required field:
Does your solution requires extends the memory capabilities?
Expand EEPROM capabilities.
Expand Flash capabilities.
Use microSD cards as a data storage medium.
Required field:
Does your solution require any extra add-ons?
Generate an audible alarm, as well as audible feedback for activities on a user interface.
Real-Time Clock module with its own battery backup.
Extension cable to position small WisBlock modules apart from the WisBlock Base Board.
Does your solution require extending the power supply options?
Power external sensors that require 12V power supply.
highly efficient, Qi-compliant, single-chip wireless power receiver and charger.
Required field:
How should the product be powered based
upon its settings and user interactions?
Does the product require a custom branded or generic enclosure?
Customized enclosure in color with company logo.
Generic enclosure with RAK’s logo
Based on the product's standard daily use application,
what type of enclosure does the product need?
How many devices will be manufactured?
Enter your email.
Please enter your email address to receive our
WisBlock recommendation for your next IoT solution.
Hooray!
Check your inbox to see our
WisBlock recommendation for your next IoT solution.